IRANOL AVAN

IRANOL AVAN is ethylene glycol based antifreeze with selective additives which is premixed (50%) with water. It will provide good protection against corrosion and rust.

Performance levels

D- 3306ASTM
338 ISIRI

Application

.Automotive and light–duty diesel engine.
In industrial internal combustion engines where an antifreeze/ coolant is required to provide protection against freezing, boil over and corrosion.

Specifications

.Universal formula for both automotive and light-duty diesel engine.
.Protect the cooling system against freezing , corrosion and boil-over
.Excellent heat transfer properties
.Compatible with cooling system filters
.Compatible with rubber o-ring, water pump seals, hoses or gasket material found in most cooling system.

.Operational Guidelines:

.Drain the system
.Examine all hoses and clams and replace if necessary. .
.To change coolant, drain completely, fill with water and run engine until warm with the heater on high; thoroughly drain the system. Repeat until drained water is visibly clear.
.Add sufficient antifreeze/ coolant to provide the degree of protection desired. The use of de-ionized or distilled water is generally recommended.
.When preparing solutions, water should not contain excessive solids, hardness salts, sulfates or chlorides. (ASTM D- 3306)
.Iranol AVAN: Ready to use and does not require mixing with water.

Print Send to firend

IRANOL AVAN IRANOL AVAN is ethylene glycol based antifreeze with selective additives which is premixed (50%) with water. It will provide good protection against corrosion and rust.