IRANOL AF-G

Anti Freeze, Anti Boil, Anti Corrosion

IRANOL AF-G is ethylene glycol based antifreeze with selective additives. It will provide good protection against corrosion.

Recommendation

Application

.Automotive and light –duty diesel engine.
.In industrial internal combustion engines where an antifreeze/ coolant is required to provide protection against freezing, boil over and corrosion.

.Operational Guidelines::

- To change coolant, drain completely, fill with water and run engine until it is warm; thoroughly drain the system. Repeat until drained water is visibly clear.
- The product should be diluted with water in ratio of 1 part Iranol AF-G to 1 part water (50% by volume in water).
- Do not dilute this product in engine cooling systems.
- Only use good quality water (water should not contain excessive solids, hardness salts, sulfates or chlorides, ASTM D-3306).
- When pre-diluted under the guide lines described above, the performance requirements of the following engine coolant specifications should be considered.

Specifications

.Universal formula for both automotive and light-duty diesel engine.
.Suitable for all weather conditions.
.Protect the cooling system against freezing , corrosion and boil-over
.Excellent heat transfer properties
.Compatible with cooling system filters
.Compatible with rubber o-ring, water pump seals, hoses or gasket material found in most cooling system.